Addressable zone module

The Zone module (AW-D310 module) can be used with an addressable fire alarm panel. It can be connected to a conventional photoelectric smoke detector, a conventional heat detector or other conventional devices. When these conventional devices trigger an alarm, the AW-D310 module sends an alarm signal to the fire alarm panel via a signal loop.

Features and technical parameters

• Loop type: non-polarised two-wire system

• Standby current: loop current < 0.5 mA; supply current < 15 mA

• Activation current: loop current < 2 mA; supply current < 35 mA

• Loop operating voltage: 20 ~ 28 V loop for terminals L1 and L2 (non-polarised wiring)

• Operating voltage: DC 20~28V for +24V & GND terminals

• Operating indicator: the inspection indicator flashes about once every 12 seconds in inspection mode or stays lit in operating mode.

• Operating environment: Temperature: －10℃～50℃; Relative humidity: ≤95% (40℃±2℃, non-condensing)

• End-of-line resistor: 4.7 kΩ resistor

• External dimensions: 86 × 86 × 40 (mm)

• Weight: approx. 119 g

• Applicable standard: EN 54-18